Classic Side Kick (KIT: PLANS + SPECIALTY HARDWARE)

$570.00

The Sidekick is our strongest and most popular design.  It is made from 1 1/4″ PVC and is capable of holding up to 400lbs.  You can also mount an electric drive or even gas motor on this model.

Available on backorder

Description

This kit contains the speciality parts and plans only. you will also need either our bike parts kit or salvage bike parts to complete.

The classic Side kick is a two passenger four wheel bike with six speeds, that can support the addition of an electric or gas engine. The frame is built from 1-1/4″ PVC tubing reinforced with a steel tube or wood dowel in the lower rails, in comparison, the Baja and Sun Coasters use 1″ tubing.

The classic Side Kick uses individual bucket style seats, this feature allows the seats to be mounted at different distances from the pedals. These seats are available at discount or marine stores or even Walmart . They can be found in various colors and are very light weight. Last but not least you don’t have to build them. I paid $60 for the pair.

A bench seat could also be used.

Unlike the smaller bikes we offer that use 16″ front wheels, the SK uses twenty inch diameter front and rear wheels. Affording  a more stable ride than a three wheeler.   I have also moved the seats back 2″ and increased leg clearance by the clever use of a handle bar steering system.

Yes, that is a fishing tackle box that serves as a glove compartment or tool box.

The gear shift lever to control the 6-speed derailleur is mounted on the steering column. The hand brake levers are connected to inline brakes on both the rear wheels.

The driver sets in side the frame and the “side kick” straddles the right side rail. The reason is to keep the vehicle as narrow as possible for use on bike lanes. The carrier on this model is made from 1″X 2″ hard wood strips.

A 48 or 36 volt electric wheel can be added. I have also been experimenting with a small gas motor.

The bottom line the Sun Coaster and the Baja are both fine units, but are single rider cycles and are lighter weight, which is good in the cycling world. But I would say if you are 6′ or taller or want to carry 400 lbs the side-kick is the right choice. The Side kick can also be built as a single passenger bike basically a heavy duty Sun Coaster. Of course all the American Speedster vehicles are environmentally friendly .

Our unique drive system is set up so both riders pedal and power is thru a 7-speed derailleur to the left rear wheel.

Electric wheel videos. http://www.youtube.com/watch?v=HyUMzR3eiCY http://www.youtube.com/watch?v=i1fd0C2eLEc

This leaves the right wheel free to be powered by gas or electric motors with out effecting the pedal drive system.

The cost to build a Side Kick with all new materials is about $950.00 , less if using used bike parts and constructing the hardware.

The price of the Speciality hardware is $570.00

Reviews

There are no reviews yet.

Be the first to review “Classic Side Kick (KIT: PLANS + SPECIALTY HARDWARE)”

Your email address will not be published. Required fields are marked *

You may also like…